SCB-A10

Digital input and output Controller

DIO controller is designed to monitor digital inputs and remote control digital outputs. SCB-A10 : 10 digital inputs and 10 digital outputs.
Monitor digital inputs : panic button, temperature sensor, door sensor,…etc.
Remote control outputs : siren, alarm, light, fan
Setup trigger events between between terminals thru TCP/IP. For example :
If the temperature in the server room is too high, it triggers the security office’s alarm and also the server room’s air conditioner (outputs)
If the humidity in the greenhouse is low, triggers water spray (outputs), low air quality will trigger air cycling (outputs)

FEATURES HIGHLIGHTS

  • Modbus gate communication protocol support
  • Proprietary software (SoMac) support.
  • VMS for checking input status and remote control outputs
  • Built-in http server.
  • SCB-A10: 10 Digital Inputs And 10 Digital Outputs.
  • Monitor Digital Input: Panic Button, Temperature Sensor, Door Sensor,…etc.
  • Remote Control Outputs : Siren, Alarm, Light, Fan
  • Report E-map monitoring and email alert.
  • Master & Slave structure (Max 30 DI and 30 DO).
  • Sensor text overlay (BF1010 DIO controller with temperature / humidity / CO2 sensors, shown real room status from sensors).
  • Alarm alert (screen alerts from events – unregistered user, door open too long).
  • Setup trigger events between terminals thru TCP/IP.

SPECIFICATION

Hardware

 

CPU

16bit / 100MHz

Memory

256 KB ROM & 1 MB SDRAM

Watch Dog

System protection

Power Requirement

DC 9 ~ 30 V, 500 mA

Operation Temperature

0°C ~ 55°C

Operation Humidity

5% ~ 85%RH

Storage Temperature

-20°C ~ 75°C

Dimension

135 x 115 x 35 mm

Weight

525 g.

 

 

Interface

 

Ethernet RJ45 port

10 / 100Base-T, Half / Full duplex, Auto Cross Over, 1.5KV magnetic protected

Serial

Port

Interface

Port Type

Signals

COM1

RS-485

Screw Terminal

D+, D-

COM2

RS-485

Screw Terminal

D+, D-

I/O port

10 Channel I/O : 10 isolated D/I an 10 isolated D/O
Isolated DI: Optical Isolation: 2,500VDC; Overload protection: 70VDC; Dry Contact
Isolated DO: Optical Isolation: 2,500VDC; Contact rating: AC: 120V@0.5A; DC: 30V@1A
Total switching time: 10msec

Ethernet Setting

Static IP / DHCP Client / PPPoE

Serial Setting

Parity Check: None, Even, Odd, Mark, Space
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 2 Flow Control; RTS / CTS, XON / XOFF

Operation System

Windows XP / 2000 / NT / 95 / 98, Linux, UNIX

Protocol

TCP, IP, UDP, Telnet, ARP, DHCP, ICMP, SMTP, PPPoE, HTTP, UNIX

Operation Mode

Support TCP / UDP Server, Client mode.
User name & Password protected for web management.
Bulit-in HTTP server for set up and remote management thru browsers.
Support system backup and restore.

 

 

Scroll to Top